Designed for extremes
The performance values of the MAX hand-held tool speak for themselves: With up to 8,000 N, the pneumatic motors of MAX develop an enormous tensioning force. The tension force is held consistently thanks to a return stop after joining.
MAX is designed for steel straps up to 32 mm wide that are closed by a seal with double notch. Its weight of around 11 kg is exemplary in this performance class. Therefore, MAX is particularly suitable as a light-weight partner for heavy-duty applications such as pipe and wire assemblies, slit coils and coils.
These applications require not only a tool equally light and powerful, but also one that can do the job with ease and reliably under adverse environmental conditions. MAX accepts this challenge:
Design and technology speak for themselves.
| Technical Data | |
|---|---|
| Kind of drive (tensioning) | Pneumatic |
| Tension force | max. 8,000 N (adjustable) |
| Kind of drive (sealing) | Pneumatic |
| Seal (Type) |
RSK 19 ; 25 ; 32 |
| Strap feeding speed | 0.11 m/s 0.36 ft/s |
| Dimensions | 450 x 195 x 300 mm (L x W x H)
17.7 x 7.7 x 11.8″ (L x W x H) |
| Weight | 11,7 kg 25.8 lb |
| Air pressure | min. 5 bar flow pressure (for MEGABAND®)
max. 6 bar flow pressure |
| Air consumption (during tensioning) |
11 Nl / s |
| Air consumption (during sealing) |
6 Nl / s |
| Cross-section | G 1/4 “ |
| Handarm vibration | information currently not available |
| Noise level | 76 dB (A) |
| Strap/Joint | |
|---|---|
| Type of strap | Steel strap |
| Strap | Automatenband MEGABAND® |
| Strap width | 19, 25, 32 mm 3/4″ ; 1″ ; 1 1/4″ |
| Strap thickness | 0.80 – 1.00 mm (for Automatenband) 0,80 mm (for MEGABAND®) 0.031 – 0.039″ (for Automatenband) 0.031″ (for MEGABAND®) |
| Kind of seal | Seal-joint (double notch) |
| Sealing strength (depending on strap quality, strap dimensions) |
up to approx. 75% of the strap breaking load |
| Application |
|---|
| Strapping of round and flat packages (e.g. sectional steel, bundles, pipes, coils, etc.) for stationary use. |
