Customer Benefits

• no seals required – big savings
• very simple handling
• most ergonomic design

Technical Features

• tension force: up to 6,000N | 1,349lbf
• strap dimensions: up to 19 x 0.80mm | 3/4 x 0.031”
• weight: 4.3kg | 9.5lb


Minimal effort for high-performance strap
The HKE-HD is a special tool for using straps with a width of 19 mm and thickness from 0.6 to 0.8 mm.
Processing such straps requires of course a little more effort than processing standard straps. The HKE-HD has a more voluminous body than its little brother, the HKE-L, to master the heavier loads with even more confidence. The longer levers make the job easier.
Apart from that, the typical HKE advantages are retained in the HD version: the TITAN-typical sealless joint with three notches is particularly suitable for flat packages.
Further advantages are the minimal risk of injury from this joint and the use of the HKE-HD in mobile applications. The HKE-HD is flexible enough for use in mobile applications.

Technical Data
Kind of drive (tensioning) Manually
Tension force up to approx. 6,000 N
Kind of drive (sealing) Manually
Dimensions 570 x 130 x 190 mm (L x W x H)

22.4 x 5.1 x 7.5″ (L x W x H)

Weight 4.2 kg
9.3 lb
Type of strap Steel strap
Strap Automatenband
up to approx. 900 N/mm²
tensile strength
up to approx. 1.100 N/mm²
tensile strength
Strap width 19 mm
Strap thickness 0,60 – 0,80 mm
0.024 – 0.031″
Kind of seal Sealless-joint
Sealing strength
(depending on strap quality, strap dimensions)
to approx. 75% of the strap breaking load
Minimum bearing area
Flat package 150 mm
Strapping of flat packages (e.g. palletized goods) for mobile use.