Joint forces
Each strapping process consists of two steps. Tensioning and joining.
The HPE-L combines muscle power and pneumatics for both processes. The strap tension of up to 7,000 N is generated pneumatically while joining is done manually.
The HPE-L offers the same advantages as the HKE but expands them by greater user-friendliness and a uniform and high tensioning force thanks to pneumatic drive.
This saves valuable energy when working with flat packages
| Technical Data | |
|---|---|
| Kind of drive (tensioning) | Pneumatic |
| Tension force | up to 7,000 N |
| Kind of drive (sealing) | Manually |
| Strap feeding speed | 0.15 m/s 0.5 ft/s |
| Dimensions | 360 x 115 x 160 mm (L x W x H)
14.2 x 4.5 x 6.3″ (L x W x H) |
| Weight | 5.5 kg 12.1 lb |
| Air pressure | max. 6 bar flow pressure |
| Air consumption (during tensioning) |
0,36 m³ / min. 12.7 ft³ / min. |
| Cross-section | information currently not available |
| Handarm vibration | < 2.5 m/s² |
| Noise level | 78 dB (A) |
| Strap/Joint | |
|---|---|
| Type of strap | Steel strap |
| Strap | Automatenband MEGABAND® Megaflex |
| Strap width | 13, 16, 19 mm 1/2″ ; 5/8″ ; 3/4″ |
| Strap thickness | 0.50 – 0.80 mm (for Automatenband, Megaflex) 0.50 – 0.63 mm (for MEGABAND®) 0.02 – 0.031″ (for Automatenband, Megaflex) 0.02 – 0.025″ (for MEGABAND®) |
| Kind of seal | Sealless-joint |
| Sealing strength (depending on strap quality, strap dimensions) |
up to approx. 75% of the strap breaking load |
| Minimum bearing area | |
|---|---|
| Flat package | 150 mm 5.9″ |
| Application |
|---|
| Strapping of flat packages (e.g. palletized goods) for stationary use. |
